Power Digital - Mimaki Direct Sublimation DS 1800

Login

username:

password:

forgot your login?

Products > Mimaki > Direct Dye-Sublimation

DS Series

Introducing a high resolution system which is more ecologically friendly and provides more efficient operation as compared to traditional sublimation transfer systems.

High, sharp print quality

Direct printing provides fine lines and sharp edges compared to using transfer systems.

Environmental-friendly

No need to use transfer paper.

Reduced cost

This system requires no transfer paper or liner paper. Its running costs are much lower than the cost of traditional transfer systems.

Improved efficiency of operation

The system avoids cockling of printed transfer paper and mistakes made by wrinkling transfer paper when transferring the ink onto fabric.

Equipped with media take-up device and media feeder with a dancer roller

The tension bar moves up and down to adjust for correct feeding. Allows continuous operation.

Fabric supply mechanism

In addition to the drive roller and friction roller, the take-up unit and feeding unit with a dancer roller cause tension in the fabric to prevent it from wrinkling. The fabric retainer holds both edges of the fabric preventing it from touching the print head.

Ditch for penetrated ink

In order to prevent ink from penetrating the fabric and marking other fabrics, a ditch is available.

High-speed print heads

The head configuration employs an array of two staggered print heads.
1-way (single ink set) for fast printing and 2-way (dual ink set) for multipurpose printing are available. In addition both print modes can use either high speed print of 4-color or high quality print of 6-color.

<<Back to TOP>>

		DS-1600	DS-1800
Printing head	Method	Piezo-electric drop on demand
	Nozzle configulation	Eight heads (4 x 2 lines, stagger arrangement)
	Number of nozzles	<6-color print> 1-way: 360 nozzles 2-way: 180 nozzles
		<4-color print> 1-way: 720 nozzles 2-way: 360 zozzles
Resolution		360, 540, 720 dpi
Maximum printing width		1620mm(60.7")	1850mm(72.8")
Head height adjustment		1.2mm (0.04") to 10mm (0.39")
Print Modes 1*)	6-color printing	360 x 360 dpi : 2 / 4 / 8 passes, unidirection / bidirection
		360 x 540 dpi : 3 / 6 / 12 passes, unidirection / bidirection
		360 x 720 dpi : 4 / 8 / 16 passes, unidirection / bidirection
		720 x 720 dpi : 4 / 8 / 16 passes, unidirection / bidirection
	4-color printing	360 x 360 dpi : 1 / 2 / 4 passes, unidirection / bidirection
		360 x 540 dpi : 3 / 6 / 12 passes, unidirection / bidirection
		360 x 720 dpi : 2 / 4 / 8 passes, unidirection / bidirection
		720 x 720 dpi : 2 / 4 / 8 passes, unidirection / bidirection
Ink type	Sublimation dye ink	Color (black, cyan, magenta, yellow, light cyan, light magenta)
	Textile pigment ink	Color (black, cyan, magenta, yellow)
*Ink volume 2)**		6 color print 1-way: 220cc x 2 / color, 2-way: 220cc x 1 / color
		4 color print 1-way: 220cc x 4 / color, 2-way: 220cc x 2 / color
Fabric	Type	Polyester / Cotton 3*)
	Width	200mm (7.8") - 1650mm (64.9")	200mm (7.8") - 1900mm (74.8")
	Thickness	less than 7mm (0.27")
	Outside diameter	less than o 250 mm (9.84")
	Roll weight	less than 30kg (66lbs)
	Roll inside diameter	1.5" - 3"
	Printing surface	Printing can be made on either side
	Roll end treatment	Light adhesive tape is used to allow the paper to be removed
Margin (roll fabric)		10mm (0.39") ±0.5mm (0.01"), left side and right side
Interface		IEEE 1394, IEEE 1284
Command		MRL-1E (ESC/PV.1 base) Mimaki original command
Operational environment	Temperature	15ºC ( 55ºF ) - 30ºC( 86ºF )
	Humidity	35 - 65 % Rh ( no condensation )
Power		AC 100 - 240 V ±10% ( auto voltage ), 50 / 60 Hz ±1 Hz
Power consumption		less than 500W
Weight		230kg (507lbs)	250kg (551lbs)
Outside dimensions	Width	2750mm (108.3")	3040mm (119.7")
	Depth	940mm (37.0")
	Height	1350mm (53.2")

<<Back to TOP>>