Products > Mimaki > CG-SRII
|
High Quality , Multifunction Cutting Plotter for a variety of cutting uses. |
| For Vinyl Graphics - Stickers, labels, floor and vehicle graphics. |
   |
| For Pre-printed transfer media - for heat transfer of fashionable designs to apparel. |
| For Masking Film - for painting, spraying and sandblasting. |
|
New technology that satisfies professional needs. |
High cutting quality with the new RSC function. |
| The RSC (Real time Stroke Control) function detects blade strokes and automatically corrects the blade force even when media thickness or blade length changes. With this function, more precise cutting is achieved. |
Over Cut Function. |
| The over cut function overlaps the start and end points of the media thus eliminating cut lines that are not completely cut. |
Cutting functions that make the jobs easier. |
High-speed continuous crop mark detection. |
| An optical sensor enables automatic consecutive detection of crop marks throughout the nested images. Together with the automatic adjustment function, it helps to achieve precise contour cutting. |
|
 |
|
| A light pointer easily adjusts the head position to the crop marks. |
By continuously detecting maximum of four points, nested images in both X and Y axis can be cut aligning each image automatically. |
|
"Half cut" Function |
*The half cut function is Mimaki’s proprietary technology |
| With the half cut function, the backing sheet can be cut, leaving a few connection points, which hold the image in place after cutting. When finished the backing sheet can be easily detached. |
|
Model Line Up |
|
|
|
|
Effective cutting area 1,070mm (42.1") |
Effective cutting area 1,070mm (42.1") |
|
| |
![]()
|
|
|
| Acceptable
sheet width |
90-1,250mm
(3.54"-49.2") |
90-1,550mm (3.54"-61.0") |
| Effective
cutting area *1 |
1,070mm
(42.1") |
1,370mm (53.9") |
| Maximum
cutting speed |
85 cm/s (33.5"/s) (at the angle of
45) |
| Adjustable speed range *2 |
1-10cm/s:1cm step adjustment (0.39"-3.94"
/s:0.39" step adjustment) |
| 10-60cm/s 5cm step adjustment (3.94"-23.6"
step adjustment) |
| Repeatability |
0.2mm / 2m (Excluding shrinkage / expansion
caused by film temperature) |
Effective
Repeatability |
1,050mm x
2m |
1,350mm x 2m |
| Pen
pressure |
400g |
| Range of
down pressure |
Cutter |
10-20g (2g step), 20-100g (5g step), 100-400g
(10g step) |
| Pen |
10-20g (2g step), 20-100g (5g step), 100-150g
(10g step) |
| Acceptable
sheet *3 |
Vinyl up to 0.25mm (0.01") thickness,
Fluorescent type vinyl, Reflective sheet |
| Applicable
tools *4 |
Cutter, Water based ball-point pen,
Oil
based ball-point pen, Pouncing tool |
| Type of
command |
MGL-IIc / Ic1 |
| Interface |
USB,RS-232C |
| Receiver
buffer size |
30MB Standard |
| Operational environment |
5-35°C (41-95 °F), 35-75 %(Rh)
Non-condensation |
| Power
requirement |
AC100 V-240V, 120VA or less |
| Dimensions
(WxDxH) |
1,435mm (56.5")x580mm (22.8")x1,125mm
(44.3") |
1,735mm (68.3")x580mm (22.8")x1,125mm
(44.3") |
| Weight
(with stands) |
38kg (83.8lbs) |
44kg (97.0lbs) |
All trademarks or registered trademarks are the property of the respective owners.
Specifications are subject to change without notice. |
| *1: |
Maximum sheet feeding length for differs depending on the software. |
| *2: |
Restricted sheet width. |
| *3: |
Provided that the blade specific for fluorescent type vinyl (SPB-0007)
and the blade specific for reflective sheet (SPB-0006) are used. |
| *4: |
The goods on the market are φ8-φ9.
No guarantee for with accuracy and image quality. |
|
<<Back to TOP>> |
