Products > Mimaki > CG-FX
|
High Speed Continuous Registartion Mark Deteciton
An optical sensor enables automatic consecutive detection of registration marks throughout the nested image, in which the Inkjet printers print, in combination with the automatic correcting feature that allows you to obtain a precise contour cut. |
Light pointer easily adjust the head position to crop marks
|
 |
A much more accurate cut is achieved by constantly detecting a maximum of 4 points continuously and even allowing the user to input the number of copies in each X/Y direction.
|
|
HALF CUT Mechanism (Mimaki Patented) |
An automatic sheet cutter mechanism provides greater flexibility and enhanced performance. |
| With the original half cut function, the backing sheet can be cut leaving a little bit of half cut connecting points,which can be easily detached when necessary.Various media without backing sheets can be also cut |
 |
 |
|
| Easy operation with backlit front panel and a convenient storage area located on the upper portion of the frame. |
|
|
- Selectable clamp pressure with high and low setting ensures accurate cutting of various media.
- Selectable three jog speeds ensure proper and easy positioning of the head to the point.
- Over-cut function makes the starting and ending points overlapped, which eliminates uncut portion of the media.
- Media can be loaded from back or front.
- Up to 6 roll media can be set at a time(1 set standard).
- Plug-in cutting software for CorelDRAW and Illustrator is included.
- A special adaptor to use commercially available pens and USB interface are included.
|
|
Item |
CG-75FX II |
CG-130FX II |
CG-160FX II |
| Acceptable Sheet Width |
90mm~1,040mm |
90mm~1,580mm |
90mm~1,880mm |
| Acceptable roll sheet |
Outer less than 200mm, Roll weight less than 18kg |
Outer less than 200mm, Roll weight less than 25kg |
| Effective Cutting Area |
760mm x 51m |
1,300mm x 51m |
1,600mm x 51m |
| Maximum auto cutting width |
870mm |
1,425mm |
1,720mm |
| Maximum cutting speed |
100cm/s |
| Maximum moving speed |
140cm/s |
| Adjustable speed range |
1-10cm/s : 1cm step adjustment |
10-50cm/s : 5cm step adjustment |
50-100cm/s : 10cm step adjustment |
| Mechanical resolution |
0.005mm |
| Command resolution |
0.025mm or 0.001mm-MGL-IIx |
| Repeatability |
±0.2mm (Excluding shrinkage / expansion caused by the film temperature) |
| Pen pressure |
400g |
| Range of down pressure |
Cutter |
10~20g(2g step), 20~100g(5g step), 100~400g(10g step) |
| Pouncing |
10~20g(2g step), 20~100g(5g step), 100~400g(10g step) |
| Pen |
10~20g(2g step), 20~100g(5g step), 100~150g(10g step) |
| Acceptable sheet |
Vinyl up to 0.15mm thickness, Fluorescent type vinyl, Reflective sheet |
| Acceptable sheet for pouncing |
Paper thickness: 0.06~0.13mm |
| Applicable tools |
Cutter, Water based ball-point pen, Oil based ball-point pen, Pouncing tool |
| Type of command |
MGL-IIc |
| Interface |
RS-232C,USB |
| Receiver buffer size |
30MB Standard (20MB when sorting) |
| Operational Environment |
Temperature |
5~35ºC |
| Humidity |
35~75%(Rh) Non-condensation |
| Power requirement |
AC 100V~240V |
| Power consumption |
130VA or less |
| Dimensions (WxDxH) |
1,285mm x 700mm x 1,217mm |
1,825mm x 700mm x 1,217mm |
2,125mm x 700mm x 1,217mm |
| Weight (with stands) |
50kg |
60kg |
69kg |
|
<<Back to TOP>> |
